The HO honey comb belt is constructed of cross rods and a flat metal strip. At the sides of the belt the cross rods have a welded ring (welded edges). In a number of dimensions it is possible to give the sides of the belt a clinged edge. There are a number of predefined belt executions with different pitches and material dimensions. The belt can also be provided with side plates or flights. The belt width is determined by the belt specification and the number of odd spaces. The belt width can be chosen from ca. 50 mm until 3500 mm.
HO-ZK honey comb belt with clinged edges
The HO honey comb belt is positively driven by sprockets, and can be used at conveyor speeds of less than 1 metre per minute to about 25 metres per minute, which are considered normal speeds. Speeds above 25 metres per minute are considered to be high speeds and can affect the life of the belt. The construction of the conveyor system and the process conditions are also important considerations.
HO honey comb belts are used in production processes with temperatures of -30ºC up to +400ºC in food and other industries.
The HO honey comb belt needs minimal maintenance and will have a working life of many years, if used well. The belt is standard made of steel, galvanised steel, stainless steel AISI 304 and AISI 316. HO honey comb belts are used in, for example:
-cooling systems
-washing systems
-sorting systems
-drying systems
-product handling systems
-sieving systems
-bread production systems
-waste handling systems
English
Deutsch
Français
Español
Italiano
Português PT
