Machine for pitting cherries 250-300 kg/hour Harver DM300x2

The AR-Tech company brings to your attention our new development - a modified cherry pitting machine Harver DM300x2. The machine is designed for knocking out pits from fresh cherry fruits. The maximum productivity is 250-300 kg/hour. The productivity of this machine depends on the size of the fruit.

The main advantage of this model is 2 drums with 9 holes in each, which allows you to process 50% more cherries than similar equipment.

The machine can operate with cherries after freezing. The temperature of the cherries should be: - 6°C to - 8°C.

All parts in contact with the fruit are made of food-grade plastic and food-grade stainless steel AISI304. His structure complies with all applicable safety standards, sanitary and hygienic standards and is suitable for use at enterprises and food industry workshops.

Specification:

- The machine works with both small cherries and large cherries and sweet cherries.

- Fruit diameter – from 18 to 25 mm (28 is optional). 3 drums with different holes to choose from, depending on the size of the cherry.

- High productivity: 1260 pitted cherries per minute, 18 cherries at the same time.

- Significant savings in time and operating costs.

- Delivery of new fruits to cells occurs automatically.

- Ease of cleaning and maintenance.

- The relevant parts are easily removed and washed.

- Minimum payback period due to high productivity and low cost compared to other similar machines.

- 12-month warranty.

HARVER DM300x2 is suitable for use in bakeries and confectionery shops, small fruit processing factories. The machine is not a household appliance and requires qualified service personnel.

Working principle:

Cherries are loaded into the receiving container and picked up by cells in the working drum, which rotates 12 steps per full turn. Cherries that have fallen into the corresponding cells are delivered to the processing area, where sharp plungers of a special shape, penetrating through the center of the fruit, remove the stone, directing it into a hole with a rubber cuff. The pits fall into a pits receiver with an auger, which removes them from the working area. The plungers return to their original position, the drum is rotated to the next steps and the knocked out cherries fall to the other side of the machine, falling into the storage container installed by the operator.

Technical data:

- Productivity: 250-300 kg/hour

- Power supply: 230 V/50 Hz

- Weight: 85 kg

- Dimensions: 535/590/510 mm

- Installed power: 0.37 kW

- Dimensions (LxWxH) W - without tray/with tray: 880 x 500/730x750 mm

We have also machines with higher performance.