MCC-2100 microprocessor controller

The MCC-2100 microprocessor controller is designed for automatic control of SMOKING AND SCALDING CHAMBERS, RIPENING CHAMBERS and CLIMATIC CHAMBERS in the meat industry.

Intended use:

• smoking and scalding chambers
• ripening chambers
• climatic chambers

Technical specifications

POWER SUPPLY:
24 VAC

POWER CONSUMPTION:
10 W

DIMENSIONS:
Mounting hole dimensions: 290x194 mm
Installation depth with connections: 48 mm
External dimensions of the frame with seal: 325x229mm

DISPLAY:
LED 0.8’’ x 2 digits LED 0.8’’ x 2 digits
LED 0.8’’ x 3 digits LED 0.8’’ x 3 digits
LED 0.8’’ x 3 digits LED 0.8’’ x 3 digits
LED 0.8’’ x 2 digits LED 0.8’’ x 2 digits
LED 0.8’’ x 4 digits LED 0.8’’ x 4 digits

WEIGHT:
Controller: 1400 g
Transformer: 800 g

ENCLOSURE:
Monolithic type Front Panel

PROTECTION RATING:
From the connections’ side: IP 20
From the front: IP 65

TEMPERATURE MEASUREMENT RANGE:
-50.. +400 °C (resolution 0.1 °C)

OPERATING CONDITIONS:
Operation temperature: 0 °C .. +60 °C
Storage temperature -20 °C .. +70 °C
Humidity: 0..75%

PROGRAMS:
50 (0..49) technological programs, editable by the user, automatic chamber washing program (99)

DIGITAL COMMUNICATION:
1x RS 232
1x RS 485

TYPE OF REGULATING DEVICE:
No

KEYBOARD:
50 “CLICK SWITCH” keys

MEASUREMENTS RECORDING
up to 5000 samples

REAL TIME CLOCK
Yes

PC SOFTWARE:
MPC4

AUTOSTART
Yes

INPUTS:
Analog inputs: 8
Analog input type
Current signal: 0..20 mA or 4..20 mA
Temperature sensor: PT - 100
Range: -50 .. 400°C
Accuracy: 0.1 °C
Digital inputs: 8
separated Umax=230V
BINARY INPUT TYPE:
0-220 VAC (0-24 VAC)
Opto-isolation

OUTPUTS:
Relay outputs: 24
(Relay output type: Contact 250 V
Total current of open relays: Iomax = 5 A)
Analog outputs: optional

MISCELLANEOUS:
controlling and setting temperature inside an oven (range 0..250°C)
controlling and setting temperature increase (fish smoking) (range 0..99°C/min)
chub temperature control (range 0..250°C)
analysis and notification of emergency conditions
automatic execution of the operation programs of the oven and auxiliary equipment (contactors, solenoid valves, etc.)
manual operation mode allows direct control of actuation devices (useful for service works)
Compatibility with a superordinate computer

RELAY CONTACT RATED LOAD
Recommended external protection - fuse: 6.3 A
Maximum total current (bus) -4A
Maximum current applied to relay
(RE13 - RE24) - 4A
CAUTION! Using fuses over 6.3 A is not recommended

COMPLIANCE WITH STANDARDS:
According to directives: 89/336/EEC as amended
91/263/EEC
92/31/EEC
93/68/EEC
PN-92 / E-08106
PN-EN 50082-2:1997
PN-EN 61000-4-5:1999
PN-EN 61000-4-4: 1999
PN-EN 61000-4-2: 1999
EN 61000-4-11: 1997
PN-EN 61000-4-8:1998
PN-EN 60751 +A2:1997