Pneumatic press

Contract price

Pneumatic press with closed tank

UPC:

EAN13:

Cantidad

Vendido por:

Velo Acciai S.r.l.

Ver más productos de este vendedor

Vendedor marca como favorito

Descripción

Pneumatic press with closed tank PSC 10- PSC 15 – PSC 22 – PSC 30

AISI304 Stainless Steel frame on wheels.
Axial feeding with manual ball valve DN 100 (PSC 10) / DN 120 (PSC 15 – PSC 22 – PSC 30).
Feeding pressure switch with sound alarm to indicate end of filling cycle and automatic stop of feed pump (feed pump not included).
Closed tank with manual opening sliding semi-hermetic rectangular door (600×450 mm.) and membrane made in fabric suitable for foodstuff.
Hinged draining channels.
Device for membrane inflating and deflating is installed on the press and it is composed by compressor – depressor and set of pneumatic solenoid valves.
Basin for product collecting.
Control board made in polyester reinforced with fiberglass and equipped of 18 programs PLC with display touch-screen for management of all pressing phases in automatic or manual mode. Protection control board in Stainless Steel.
Standard voltage 400/3/50 Hz.

Pneumatic press with closed tank PSC 50 – PSC 80 – PSC 100

AISI304 Stainless Steel frame on wheels (PSC50) / on fix supports (PSC80 – PSC 100).
Axial feeding with manual ball valve DN 120.
Feeding pressure switch with sound alarm to indicate end of filling cycle and automatic stop of feed pump (feed pump not included).
Closed tank with sliding semi-hermetic (PSC50) / hermetic (PSC80 – PSC100) door (800×580 mm) with pneumatic piston and membrane made in fabric suitable for foodstuff. Hinged draining channels.
Device for membrane inflating and deflating installed on the press and it is composed by compressor (inflating), blower (inflating and deflating at low pressure) and set of pneumatic solenoid-valves.
Basin for product collecting.
System for automatic start and stop of must extraction pump with switch and floater (extraction pump not included).
Control board made in polyester reinforced with fiberglass (PSC50) / Aisi 304 (PSC80 – PSC100) and equipped of 18 programs PLC with display touch-screen for management of all pressing phases in automatic or manual mode.
Standard voltage 400/3/50 Hz.

Pneumatic press with closed tank PSC 150-250-320-440

AISI304 Stainless Steel version with carbon steel frame on fix supports.
Axial feeding with pneumatic ball valve DN 120 (PSC150) / DN125 (PSC250) / DN150 (PSC320 – PSC440).
Feeding pressure switch with sound alarm to indicate end of filling cycle and automatic stop of feed pump (feed pump not included).
Closed tank with sliding hermetic door (800×580 mm) with pneumatic piston and membrane made in fabric suitable for foodstuff.
Hinged draining channels.
Device for membrane inflating and deflating installed on the press and it is composed by compressor (inflating), blower (inflating and deflating at low pressure) and set of pneumatic solenoid-valves.
Basin for product collecting.
System for automatic start and stop of must extraction pump with switch and floater (extraction pump not included).
Aisi 304 Stainless Steel control board equipped of 30 programs PLC with display touch-screen for management of all pressing phases, washing and must selection cycles (if included) with automatic or manual mode.
Standard voltage 400/3/50 Hz.