wetLAN 110

To optimize performance the wetLAN 110 includes three unique, easy changeover label magazine options. The wetLAN 110 is unmatched in the industry for its adjustment range – handling small and large label and container combinations, plus its ability to be sized for slow and high speed operation. Available options include bar code scanning, reject, orientation, label/container marking, tamper evident, and lid labelling.

Advantages:

Patch and wraparound labelling
High efficiency due to fast conversion and easy operation
Minimal investment in size parts
Attractive Purchase price – economic operation
Compact design
Low unit costs
Maximum uptime

Technical data: (basic) wetLAN 110 oscillating Magazine

Basic frame: Welded stainless steel square tube
Machine dimensions: Depending on machine design,
L 2.300 x W 1.700 x H 1.730 mm
Label magazine: Oscillating magazine with Labels loaded in vertical position
Container: Round containers
Container Ø: Min. 40 mm
Label length: Min. 80 mm, max. 395 mm (optional max. 570 mm)
Label height: Min. 40 mm; max. 315 mm
Speed: 4.000-7.000 containers / h max (depending on machine configuration as well as container and label sizes)
Conveyor belt height: 820-920 mm

Technical data: (basic) wetLAN 110 FVT 18

Basic frame: Welded stainless steel square tube
Machine dimensions: Depending on machine design, L 4.500 x W 1.600 x H 1.750 mm
Label magazine: Stationary magazine with Label loaded in vertical Position, labels added with labeler at full speed, without interruption
Container: Round containers
Container Ø: Min. 40 mm
Label length: Min. 80 mm, max. 400 mm
Label height: Min. 40 mm, max. 315 mm
Speed: 24.000 labels / h
Conveyor belt height: 820-940 mm
Technical Data: (basic) wetLAN 110 FVT 20

Basic frame: Welded stainless steel square tube
Machine dimensions: Depending on machine design
Label magazine: Stationary magazine with label storage in horizontal position for large labels
Container: For large cylindrical containers up to 5 kgs
+ cans with handle (eyelets)
Container Ø: Up to max. 200 mm
Label length: 130-650 mm
Label height: 50-315 mm
Speed: 3600 containers / h (depending on label length)

Operation:

The labeler’s conveyor chain carries containers through the inline labeller. At the infeed a metering device creates a repeatable gap between containers, initiating progressive labelling processes. As a metered container is released a photo eye activates the label magazine. A label is separated from the stack in the magazine and guided past the glue roller. The glue roller applies a very thin and uniform glue layer onto the backside of the label. The conveyor chain speed and magazine label release are timed to achieve accurate label pick up by the container. Subsequent to label pick up, the container moves into the roll-on station where the label is securely affixed to the container.

Oscillating magazine – for lower and medium output

In the oscillating magazine the label stacks are placed in upright position. During label release the magazine swivels forward so that the front label edge touches the glue layer on the rotating glue roller. Due to the adhesive force the label is separated and pulled from the magazine. Integrating optional inkjet or bar code scanning devices at the label feed position is ideal.

Upgrades wetLAN 110 with oscillating magazine

– Tamper evident labelling with additional self-adhesive labelling unit; container orientation and label registration aligning the body and tamper label are available options.
– Controls and additional coding

FVT 18 – the high speed solution

In the FVT 18 magazine the label stacks are placed in upright position. In contrast to the oscillating magazine, the FVT 18 magazine is stationary which allows higher output. Additionally labels are loaded into the magazine without interruption to production. A high speed vaccum bar picks the front label from the stationary magazine and transfers it to feed rolls before moving the label into the belt transfer station. The belt station transports the label to the glue roller. Integrating optional inkjet or bar code scanning devices at the label feed position is ideal. The driven transfer belts and conveyor speed are timed with the glue roller to ensure accurate pick up of the label by the container. This proven approach to label handling delivers consistent quality at 400 bpm.

Upgrades wetLAN 110 with FVT 18 magazine

– Tamper evident labelling with additional self-adhesive labelling unit; container orientation and label registration aligning the body and tamper label are available options
– Controls and additional coding
– Application of shaped labels

https://youtu.be/YhhWANJEZkQ